ARBURG ALLROUNDER 1300 e TREND Injection Moulding Machine

Product reference image Configuration shown may vary by quotation

ARBURG Model ALLROUNDER 1300 e TREND

ARBURG ALLROUNDER 1300 e TREND Injection Moulding Machine

ARBURG lists the ALLROUNDER 1300 e TREND with 1,300 kN clamping force and a 520 mm tie-bar spacing. The machine is paired with 290 e or 400 e injection units in the official table, positioning it for a broader mould and shot-size requirement than the smaller e TREND machines. It should be configured against the actual mould dimensions and required injection speed.

Model: ALLROUNDER 1300 e TREND
Series: ALLROUNDER e TREND
Machine type: Electric injection moulding machine

Technical reference

Specifications

Use these catalogue specifications as a starting point. The RFQ confirms the exact options and operating conditions required for your project.

Model	ALLROUNDER 1300 e TREND
Series	ALLROUNDER e TREND
Machine type	Electric injection moulding machine

Verified technical details

Clamping force is 1,300 kN, with 1,500 kN shown in brackets by ARBURG.
Distance between tie-bars is 520 mm.
Listed injection units are 290 e and 400 e.
Injection speed is 200 mm/s, with 350 mm/s shown in brackets by ARBURG.

Best-fit use cases

Applications

Larger moulds
Electric injection moulding
General plastic-part production

Why buyers shortlist it

1,300 kN clamping force
520 mm tie-bar spacing
290 e / 400 e injection-unit choices

Manufacturer profile

ARBURG

Source and commercial status

What this catalogue page means

Product data: Verified official manufacturer model or series source for model ALLROUNDER 1300 e TREND. Review the manufacturer source.

Brand and manufacturer names identify public company or product references. DerFactory is independent unless a relationship is expressly stated. Final specifications, price, availability, shipping, warranty, and order terms are confirmed before purchase.

Buyer preparation

What to confirm before requesting a quote

These details determine configuration, commercial terms, and whether the machine fits the intended production process.

01
Polymer, part weight, projected area, and production target
02
Required clamp force, shot size, screw diameter, and injection pressure
03
Mold dimensions, tie-bar spacing, daylight, and ejector interface
04
Servo package, controller, robot, dryer, chiller, and auxiliaries
05
Voltage, commissioning, training, warranty, and spare parts

Selection guides

Research this machine type

Injection Molding Machine Price and Cost Guide Compare indicative injection molding machine prices by clamping force, drive type, shot size, and automation before requesting a production quote.

Model comparison

Compare ALLROUNDER 1300 e TREND with similar machines

Use the catalogue values to build a shortlist, then confirm options and included equipment in the quotation.

Open comparison tool

Comparison point	ALLROUNDER 1300 e TREND ARBURG	ALLROUNDER 470 A ARBURG	ALLROUNDER 470 H ARBURG	ALLROUNDER 720 E GOLDEN ELECTRIC ARBURG
Manufacturer	ARBURG	ARBURG	ARBURG	ARBURG
Model	ALLROUNDER 1300 e TREND	ALLROUNDER 470 A	ALLROUNDER 470 H	ALLROUNDER 720 E GOLDEN ELECTRIC
Drive	Not specified	All-electric	Hybrid	Not specified
Machine type	Electric injection moulding machine	Not specified	Not specified	Electric injection moulding machine
Model	ALLROUNDER 1300 e TREND	Not specified	Not specified	ALLROUNDER 720 E GOLDEN ELECTRIC
Process	Not specified	Plastic injection molding	Plastic injection molding	Not specified
Series	ALLROUNDER e TREND	ALLROUNDER A	ALLROUNDER H	ALLROUNDER GOLDEN ELECTRIC
Price status	Request Quote	Request Quote	Request Quote	Request Quote

PricingRequest Quote

Request quote