ARBURG ALLROUNDER 470 A Electric Injection Molding Machine
An all-electric injection molding platform for precise and energy-efficient production.
- Drive
- All-electric
- Series
- ALLROUNDER A
PricingRequest Quote
Budget planning
Indicative market price bands
Public-market examples reviewed August 2026. Compare scope before comparing price.
| Configuration | Typical scope | Planning band | Common fit |
|---|---|---|---|
| Benchtop or small machine | Low tonnage | $3,000-$25,000 | Prototyping, laboratories, and small parts |
| Production machine | Typical SME range | $50,000-$200,000 | Recurring industrial production with standard auxiliaries |
| Large or highly automated system | High tonnage | $200,000-$1,000,000+ | Large parts, electric platforms, automation, and complete cells |
These broad planning bands summarize public market guidance. Tooling, auxiliaries, freight, installation, commissioning, and automation can add substantial cost.
Information required before comparing prices
Injection molding machine cost is driven by clamping force, shot size, hydraulic or electric drive, mold requirements, controls, auxiliaries, and automation. The mold and production cell can materially change the total project budget.
- Part drawing, resin, and finished part weight
- Required clamping force and shot size
- Hydraulic, hybrid, or all-electric drive
- Mold dimensions, tie-bar spacing, and ejector needs
- Robot, dryer, chiller, loader, and other auxiliaries
Price: Request Quote
Send the application, country, quantity, and technical details so the quotation can confirm machine configuration, freight term, lead time, and supplier terms.
Request Quote
Quote comparison
Compare like with like
| Decision | Check first | Then verify |
|---|---|---|
| Machine size | Calculate clamping force from the part and resin | Confirm shot size, platen, and tie-bar clearances |
| Drive | Hydraulic can reduce entry cost | Electric can improve precision, cleanliness, and energy control |
| Tooling | Price the mold as a separate controlled scope | Confirm cavities, steel, hot runner, sampling, and revisions |
| Cell scope | List every auxiliary and interface | Include robot, dryer, loader, chiller, conveyor, and guarding |
Matching machine references
16 references to compare before sending an RFQ.
ARBURG ALLROUNDER 470 H Hybrid Injection Molding Machine
A hybrid injection molding platform combining electric and hydraulic machine functions.
- Drive
- Hybrid
- Series
- ALLROUNDER H
PricingRequest Quote
ENGEL EVC 265/100 Electric Injection Molding Machine
An electric tie-bar-less injection molding reference for flexible precision production.
- Clamping force
- 1000 kN
- Drive
- Electric
PricingRequest Quote
ENGEL VC 460/120 TECH Injection Molding Machine
A victory-series injection molding reference for general technical components.
- Clamping force
- 1200 kN
- Series
- victory
PricingRequest Quote
ENGEL E-MAC 465/180 FT Electric Injection Molding Machine
An all-electric e-mac reference for precise and repeatable injection molding.
- Clamping force
- 1800 kN
- Drive
- All-electric
PricingRequest Quote
ENGEL E-SPEED 280/70 WP High-Speed Injection Molding Machine
A high-speed injection molding reference for fast-cycle plastics production.
- Clamping force
- 700 kN
- Series
- e-speed
PricingRequest Quote
ARBURG ALLROUNDER 720 E GOLDEN ELECTRIC Injection Moulding Machine
The ALLROUNDER 720 E GOLDEN ELECTRIC is ARBURG's 2,800 kN servo-electric injection-moulding machine. It combines servo-electric injection, dosing and mould movements with a toggle clamping unit and GESTICA control. It suits moulders prioritizing electric process control, compact installation and simultaneous movement capability.
- Model
- ALLROUNDER 720 E GOLDEN ELECTRIC
- Series
- ALLROUNDER GOLDEN ELECTRIC
PricingRequest Quote
ARBURG ALLROUNDER 720 A Injection Moulding Machine
ARBURG documents the ALLROUNDER 720 A Ultimate in a high-speed in-mould-labelled packaging application. In that reference, it moulds eight 125 ml ice-cream tubs in a 4.5-second cycle. The evidence supports evaluating it for fast, precise packaging work, while final configuration should be confirmed for the intended mould and resin.
- Model
- ALLROUNDER 720 A
- Series
- ALLROUNDER A
PricingRequest Quote
ARBURG ALLROUNDER 1120 H Injection Moulding Machine
The ALLROUNDER 1120 H is ARBURG's hybrid large-format injection-moulding machine, documented in a fully automated toolbox cell. ARBURG lists 6,500 kN clamping force, injection unit 7000 and a 60-second published toolbox production cycle. The reference cell combines the machine with GESTICA control, SCARA insert handling and a MULTILIFT V robot.
- Model
- ALLROUNDER 1120 H
- Series
- ALLROUNDER H
PricingRequest Quote
ARBURG ALLROUNDER 500 e TREND Injection Moulding Machine
The ALLROUNDER 500 e TREND is the compact entry in ARBURG's listed e TREND electric range. The official table pairs it with a 500 kN clamping-force configuration, 370 mm tie-bar spacing and 100 e or 170 e injection units. It is a practical starting point for buyers matching smaller mould envelopes to electric machine capability.
- Model
- ALLROUNDER 500 e TREND
- Series
- ALLROUNDER e TREND
PricingRequest Quote
ARBURG ALLROUNDER 1000 e TREND Injection Moulding Machine
The ALLROUNDER 1000 e TREND is a 1,000 kN electric machine in ARBURG's e TREND range. Its published table values include 470 mm tie-bar spacing, 170 e or 290 e injection units and 200 mm/s injection speed with higher values listed in brackets. These values make it a clear step up from the 500 e TREND for moulds needing a wider tie-bar window.
- Model
- ALLROUNDER 1000 e TREND
- Series
- ALLROUNDER e TREND
PricingRequest Quote
ARBURG ALLROUNDER 1300 e TREND Injection Moulding Machine
ARBURG lists the ALLROUNDER 1300 e TREND with 1,300 kN clamping force and a 520 mm tie-bar spacing. The machine is paired with 290 e or 400 e injection units in the official table, positioning it for a broader mould and shot-size requirement than the smaller e TREND machines. It should be configured against the actual mould dimensions and required injection speed.
- Model
- ALLROUNDER 1300 e TREND
- Series
- ALLROUNDER e TREND
PricingRequest Quote
ARBURG ALLROUNDER 1800 e TREND Injection Moulding Machine
The ALLROUNDER 1800 e TREND is the largest listed e TREND machine in this batch, with 1,800 kN clamping force and 570 mm tie-bar spacing. ARBURG publishes 400 e and 800 e injection-unit options and a 200 mm/s injection speed with a higher bracketed value. It is the e TREND option here for buyers who need the widest published mould window and larger injection-unit range.
- Model
- ALLROUNDER 1800 e TREND
- Series
- ALLROUNDER e TREND
PricingRequest Quote
YIZUMI A6 Injection Molding Machine
YIZUMI's A6 is an advanced hydraulic toggle-clamping series for general injection molding. Buyers should select the exact tonnage/configuration from the manufacturer table, while the series evidence supports its intelligent clamping, dual-linear-guide injection support, and energy-focused hydraulic design.
- Model
- A6
- Series
- A6 Series
PricingRequest Quote
YIZUMI SKⅢ Injection Molding Machine
The YIZUMI SK III is a general-purpose injection-molding series for small and medium machines. Its published series design focuses on platen rigidity, lower-friction injection guidance, cooling-circuit coverage, and a connected KEBA control architecture.
- Model
- SKⅢ
- Series
- SK III Series
PricingRequest Quote
YIZUMI U3 Injection Molding Machine
The YIZUMI U3 is the company's published series for Bakelite-special injection molding. Its official page describes uniform-stress clamping, a single-carriage injection unit, third-generation servo energy-saving technology, and an MS control system; buyers should still confirm the exact machine size, material package, and mold requirements before quoting.
- Model
- U3
- Series
- U3 Series
PricingRequest Quote
How much does an injection molding machine cost?
Public guidance spans from a few thousand dollars for very small machines to more than $1 million for large industrial systems. Production machines commonly require a much larger total budget once tooling and auxiliaries are included.
Is the mold included with the machine?
Usually not. Treat the mold as its own sourced and validated scope with steel, cavities, runner system, sampling, and acceptance criteria.
What is the fastest way to get an accurate quote?
Send the part drawing, resin, part weight, annual volume, mold details, power supply, country, and the required automation level.
Research notes and public sources
DerFactory reviewed the public pages below on August 2026 to establish planning context. Linked prices can change and are not DerFactory quotations.