YIZUMI is an active manufacturer represented here through model or family information verified against its official product pages.
YIZUMI is an active manufacturer represented here through model or family information verified against its official product pages.
| Country | China |
|---|---|
| Product focus | Hydraulic, electric, two-platen, multi-component, and process-specific injection molding machines |
| RFQ role | Reference profile for matching buyer requirements to relevant machine configurations. |
This profile is used for RFQ organization and buyer research. It does not claim exclusive distribution or authorization unless explicitly stated.
Send machine type, country, and technical requirements so the configuration can be checked before pricing.
Request Quote
YIZUMI's A6 is an advanced hydraulic toggle-clamping series for general injection molding. Buyers should select the exact tonnage/configuration from the manufacturer table, while the series evidence supports its intelligent clamping, dual-linear-guide injection support, and energy-focused hydraulic design.
The YIZUMI SK III is a general-purpose injection-molding series for small and medium machines. Its published series design focuses on platen rigidity, lower-friction injection guidance, cooling-circuit coverage, and a connected KEBA control architecture.
The YIZUMI U3 is the company's published series for Bakelite-special injection molding. Its official page describes uniform-stress clamping, a single-carriage injection unit, third-generation servo energy-saving technology, and an MS control system; buyers should still confirm the exact machine size, material package, and mold requirements before quoting.
The YIZUMI CG-P is a high-end multi-component injection-molding series designed around turntable positioning, clamping control, and modular injection-unit combinations. It is relevant for molded parts that require multiple materials or colors in one process, subject to validation of the final mold and injection-unit layout.
The YIZUMI CE-P is an electric multi-component injection-molding series for buyers focused on multi-material work with quieter, energy-conscious electric operation. The series uses the C-series turntable and injection-control concepts, but final configuration must be matched to mold geometry and material combination.
The YIZUMI C-NTW is a multi-component injection-molding series for molds requiring more than one material or color. Its published architecture focuses on a high-rigidity T-slot platen, controlled turntable positioning, and modular independent injection units. The final machine should be specified against the mold, nozzle-center requirement, and selected tonnage.
The YIZUMI PS5 is a high-speed injection-molding series aimed at thin-wall and high-output parts. Its published configuration emphasizes rapid injection, synchronized plasticizing, a high-rigidity clamping structure, and control features for repeated packaging-style cycles.
The YIZUMI FF-N is an electric injection-molding series for precision-focused production and automation integration. Its published design combines Tie Bar Free clamping, linear-guide injection support, closed-loop injection-pressure control, and independently controlled servo axes. Buyers should match clamping force, mold size, and optional ejection configuration to the intended part and mold.
The YIZUMI SJII is a series for high-end thin-wall injection molding, with published clamping force from 900 to 1,600 kN. Its design emphasizes platen rigidity, injection stability, and plasticizing performance for thin-wall or precision molded parts. Selection still depends on the actual mold, resin, cavity count, and required cycle.
The YIZUMI VM is a vertical injection-molding series for insert-oriented and precision molding tasks. The series combines vertical injection/direct clamping with an energy-saving servo system and expandable KEBA controls for buyers planning automated or sensor-rich cells.
LS is YIZUMI's hydraulic toggle platform for general-purpose molding.
D1M is YIZUMI's two-platen multi-component platform for large multi-component parts.
P-E is YIZUMI's high-speed platform for packaging molding.
P-M is YIZUMI's medical high-speed platform for medical consumables.
P is YIZUMI's high-speed platform for packaging molding.
DP is YIZUMI's two-platen platform for large molded parts.
D1 is YIZUMI's two-platen platform for large molded parts.
D1-N is YIZUMI's two-platen platform for large molded parts.
FF is YIZUMI's all-electric platform for precision molding.
FF-M is YIZUMI's all-electric medical platform for medical products.
SPET is YIZUMI's pet special-purpose platform for pet preforms.
UPVC & PPR is YIZUMI's pipe-fitting special-purpose platform for upvc and ppr pipe fittings.
LSR is YIZUMI's liquid-silicone special-purpose platform for liquid silicone parts.
