Atlas Copco

Atlas Copco GA 7 VSD+ Variable Speed Screw Compressor

A compact variable-speed rotary screw compressor for fluctuating factory air demand.

Motor class

7.5 kW range

Pressure

Within 4-12.5 bar series range

Atlas Copco GA 11+ Oil-Injected Screw Compressor

An industrial rotary screw compressor configuration for dependable plant air.

Motor class

11 kW range

Technology

Oil-injected rotary screw

Atlas Copco GA 15 Rotary Screw Compressor

A 15 kW-class screw compressor reference for manufacturing and workshop air systems.

Motor class

15 kW range

Technology

Rotary screw

Atlas Copco G 2 Rotary Screw Compressor

The Atlas Copco G 2 is the 2.2 kW fixed-speed entry model in the G 2-7 oil-injected rotary screw range. The official 50 Hz datasheet gives performance at 8 and 10 bar, letting buyers compare flow, noise and pack versus Full Feature weight before choosing a configuration. It is aimed at low-demand workshop or compact industrial compressed-air systems.

Model

G 2

Series

G 2-7

Atlas Copco G 3 Rotary Screw Compressor

The Atlas Copco G 3 is a 3 kW fixed-speed oil-injected rotary screw compressor in the G 2-7 range. The official table shows 8 and 10 bar performance options, with 61 dB(A) noise and listed Pack or Full Feature weights. It gives a modest capacity step above the G 2 for workshop and light industrial air demand.

Model

G 3

Series

G 2-7

Atlas Copco G 4 Rotary Screw Compressor

The Atlas Copco G 4 is a 4 kW fixed-speed compressor in the G 2-7 oil-injected rotary screw family. Its official 50 Hz data shows 34.7 m3/h FAD at 8 bar or 30.1 m3/h at 10 bar, so the required network pressure has a material effect on delivered capacity. The published 62 dB(A) noise figure and Pack or Full Feature weights support installation planning.

Model

G 4

Series

G 2-7

Atlas Copco G 5 Rotary Screw Compressor

The Atlas Copco G 5 is a 5.5 kW fixed-speed oil-injected rotary screw compressor. At the published 50 Hz conditions it supplies 51.5 m3/h at 8 bar or 45.4 m3/h at 10 bar, with a 65 dB(A) listed noise level. It is a sensible mid-range option when a small shop outgrows lower-power screw-compressor capacity.

Model

G 5

Series

G 2-7

Atlas Copco G 7 Rotary Screw Compressor

The Atlas Copco G 7 is the 7.5 kW fixed-speed model in this G 2-7 batch. Its official 50 Hz data shows 61.7 m3/h FAD at 8 bar and 57.7 m3/h at 10 bar, with a 67 dB(A) noise value. It is the highest-capacity listed fixed-speed option here for workshop and light industrial compressed-air demand.

Model

G 7

Series

G 2-7

Atlas Copco GA 37 VSD+ Variable-Speed Screw Compressor

The GA 37 VSD+ is part of Atlas Copco's GA VSD+ oil-injected variable-speed screw-compressor offering. The official GA page lists a dedicated GA 37-110 VSD+ brochure and describes variable-speed demand matching, SMARTLINK monitoring and optional integrated air treatment for the platform. It is relevant to industrial air systems where demand variation, energy management and network protection affect total operating cost.

Model

GA 37 VSD+

Series

GA VSD+